Red Metal Primer is an anti-corrosive non toxic solvent based primer
 
Designed for use direct to iron, steel and aluminium surfaces. It is not suitable for zinc coated or galvanised materials.
Application
May be applied with a brush, roller, airless or conventional spray
Stir well before use by stirring with a broad flat paddle in a scooping motion
Do not apply if temperature is below 10C or likely to fall below 10C during drying
Do not apply if rain is expected or in hot, dry conditions
Coverage
Approximately 14 square metres per litre. This will vary depending on the application technique and the surface profile of the surface.
Drying (25C and 50% Relative Humidity)
Touch dry in 4 hours at normal temperatures
Re-coatable after overnight drying. In cold or humid conditions, drying will be extended
Clean Up
Mineral Turpentine.